Heavy gauge ducting systems
Full welded round manual branch diverter with interior collar and silicone seal for bulk transport to silos, containers and such.
The change in direction of the material is operated by moving the hand lever from left to right. It is held in position by the spring. The inner plate is mounted on two ball bearings for smooth running.
These diverters are designed to be used for falling material and light pneumatic transport (for example wood chips, polystyrene, etc.) in vertical ducting in a right or left execution (to specify when ordering).
Rolled and welded plates with 6 mm edges for lock rings.
The displayed prices exclude VAT and are for informational purposes only, subject to change without prior notice. Images of the products used are 3D illustrations, small deviations are therefore possible. Although all the measurements are as precise as possible, some variations may occur during the production processes.